Amec -VTM – Cajamarquilla Project
FIMA currently is actively participating in the expansion as well as to moderinize the Zinc Refinery at Cajamarquilla Unit which is part of Votoramtim Metais, which consider two stages: 160 K, just finished and 320, currently in execution.

Fima has supplied several equipment, most important to be mentioned are:

- Pressure Vessel ( ASME )
- Storage Tanks
- Ducts, Launders and Nozzles
- Spools
- Spiral Classifiers, Screw Conveyors and Belt Conveyors
- Roaster
- Induction Furnace

Most of these supplies have been totally manufactured at Fima Factory, under design engineering of Amec, Outotec, Ajax Tocco and others. Material like stainless steel ( 904L, 316L, 304 L ) and Carbon Steel are part of the required supplies.
In this way Fima continues consolidating as the best and most important supplier of the Steel Work Shop of Peruvian manufacturers.
   
   ASME TANKS
Fima is one of the few Peruvian enterprises that has ASME qualification for manufatcturing of Pressure Vessel ( U Stamp ), Boilers ( Stamp S ) and for repair of Pressure Vessel ( Stamp R ).

Based on that, during the last two years, Fima has manufactured more than 50 Pressure Vessels for the Gas and Petroleum sectors.

Dimensions of the manufactured vessel are from 0.50 m diameter x 1.0 m long, up to 3.5 m diameter x 26.0 m long.
 

    TOROMOCHO PROJECT - KINGSMILL TUNNEL
    ACID WATER TREATMENT PLANT

FIMA just has finished succesfully the first work order for CHINALCO, which correspond to the manufacturing of tanks for the acid water treatment on Kingsmill Tunnel which has been administrated by COSAPI. The project is located on Morococha distric ,Yauli province in Junin Department.

A summary list of supplied goods are:

1 Stand pipe for treated water ( 2.0 m diam. x 14.0 m height )
1 Tank for water of process ( 2.5 m diam. x 3.0 m height )
1 Tank for Lime Slaking System / Slurry ( 2.5 m diam, x 3.3 m height )

Fima people, improving constinuosly his job, finished the complete project 2 weeks before the date that was scheduled in the contract.

 

    GRINDING MILLS

FIMA, one time more, has shown to be the "supplier of grinding mills".
Fima grinding mills manufaturing are under Denver Equipment Co. (currently Metso Minerals) authorized License.
During 2008 year we have manufactured 8 mills for several customers into Peru and other foreigen countries.
Grinding mill supplied are:

One Unit  8 ft diam  x 10ft long ( Minera Cartagena )
One Unit 8 ft diam x 8 ft long ( Mineros S.A. - Colombia )
One Unit 7 ft diam  x 9 ft long ( Lyntek ( USA - Mexico )
One Unit 5 ft diam  x 8 ft long ( Mineros S.A. - Colombia )
One Unit 5 ft diam  x 5 ft long  Constructora Titan
One Unit 4 ft diam x 8 ft long ( Minera Cartagena )
One Unit 4 ft diam x 5 ft long ( Metso Mexico )
One Unit 30 inch diam x 36 inch long ( Metso Mexico )

As everybody know, grinding mills are a critical equipment for Ore Dressing Plants. Based on it,. Fima has a carefully after sales service - including supply of spare parts  to make sure the operation without interruptions due lack of spare parts.

 
 
  Important Highlight  
 
Project Andalucita
     
 

FIMA has developed for Andalucita S.A enterprise, a turn key project for a concentrator plant to treat and get a final product ready to be sold on international markets. Capacity of this plant is for an estimated capacity of 50 MTPH.
Main equipment includes Attrition or Scrubbers Cells, Belt Conveyors Systems. Slurry Pumping System, Ore Bins, Crushers, Drier, Cooler, Dust Collector System and  most of them have been manufatured and / or supplied by Fima. By the same way, this concentrator plant, includes a DMS ( Dense Media Separation ) System based on a South African technology developed by Bateman.
The several jobs for this project consider engineering development, manufaturing, purchase of equipment  ( that are not into the Fima scope of manufacturing ) from thirds
Assembly at minesite, commisioning and start up.
Required time to execution is about 16 months.

 
 
   
  Powered By: Baella.com